A similar but not identical problem afflicted Voyager 2 in 2010. Received science data (but not engg data?) was garbled.
The problem was traced to a flipped bit in the program stored in the FDS. A command was sent to flip the bit.
The issue was diagnosed by downloading a full memory image, which implies that engg data download was working.
This is probably what was done today with Voyager 1 today. Hopefully, it is a similar problem.
https://voyager.jpl.nasa.gov/news/details.php?article_id=16
@destevez
#Voyager
9/n
NASA did not provide a date but it looks like this issue was discovered and acted upon on Dec 7 or 8.
The graphic below shows the schedule for Voyager 1 comms via DSN, generated on Dec 7. Normally, the downlink rate is 160 bps. On Dec 8, it was switched to 40 bps. And again on Dec 10. Some special commands for the FDS were also sent.
Since then, the D/L rate has been switched between 160 bps and 40 bps a few times with additional FDS commands uploaded.
https://voyager.jpl.nasa.gov/pdf/sfos2023pdf/23_12_07-23_12_25.sfos.pdf
#Voyager
10/n
NASA did not provide a date but it looks like this issue was discovered and acted upon on Dec 7 or 8.
The graphic below shows the schedule for Voyager 1 comms via DSN, generated on Dec 7. Normally, the downlink rate is 160 bps. On Dec 8, it was switched to 40 bps. And again on Dec 10. Some special commands for the FDS were also sent.
Since then, the D/L rate has been switched between 160 bps and 40 bps a few times with additional FDS commands uploaded.