Email or username:

Password:

Forgot your password?
Dan Fixes Coin-Ops's posts Post Back to profile
Top-level
Angela Scholder

@squishymage42 @ifixcoinops I needed a transfer belt for our HL4040cn, but that was no longer available.
On the 3rd toner (large) set.
Luckily I could return one new I had bought quite recently before the thing failed.

Gone back to inkjet as we don't print a lot each month. A Canon Pixma this time.

27 Nov 2023 at 12:04 | Wall-to-wall | Open on mastodon.energy
3 comments
DELETED
always tired (moved to chaos)

@AngelaScholder @squishymage42 @ifixcoinops Especially because sometimes I don't print often I got a laser because it won't dry up and things.

27 Nov 2023 at 16:26 | Open on wandering.shop
Angela Scholder

@project1enigma @squishymage42 @ifixcoinops Was for me the same reason.
Next to the LJ-6L I've had a Samsung MFP, which was not a good machine, and the Brother.

The Canon plus a set of ink was even less cost than a transfer belt would have been if still available, and as we have enough papers to print to not have a too long gap, it was just the easiest and cheapest option.

We're only with the two of us here, so there is not much, but some admin that we need on paper.

@project1enigma @squishymage42 @ifixcoinops Was for me the same reason.
Next to the LJ-6L I've had a Samsung MFP, which was not a good machine, and the Brother.

The Canon plus a set of ink was even less cost than a transfer belt would have been if still available, and as we have enough papers to print to not have a too long gap, it was just the easiest and cheapest option.

27 Nov 2023 at 16:54 | Open on mastodon.energy
Go Up