Email or username:

Password:

Forgot your password?
Felix's posts Post Back to profile
Top-level
Bornach

@jfmezei @haeckerfelix
Many suspect the gas lift piston found in many office chairs. If so, anti-static fabric sprays might not help. Adding ferrite cores to the display cables has been suggested
support.displaylink.com/knowle

28 Apr 2023 at 9:55 | Wall-to-wall | Open on fosstodon.org
2 comments
Vixy

@bornach @jfmezei @haeckerfelix Spraying the chair with a mix of liquid fabric softener and water has fixed this issue for me! Needs to be done once every couple of weeks.

28 Apr 2023 at 13:34 | Open on clacks.link
Jean-Francois Mezei

@bornach @haeckerfelix If it is the piston, then "shorting" the lower cylinder with the actual piston (uipper portion) by soldering a wire between both would prevent static generation when the piston rubs against the cylinder.
If there is static discharge, far more dangerous than blanking your screen from time to time is zapping your keyboard when you touch it, or if wired keyboard, zapping your RAM or CPU chips.

28 Apr 2023 at 14:29 | Open on mstdn.ca
Go Up