Email or username:

Password:

Forgot your password?
Kenneth's posts Post Back to profile
Top-level
Kevin Karhan :verified:

@kwf Another option oud be to use the unpopulated MiniPCIe slot and add a single-port SATA controller to it.

That should also yield 5V power for a 2,5" SSD...

28 Mar 2023 at 16:54 | Wall-to-wall | Open on mstdn.social
4 comments
Kenneth Finnegan
Kevin Karhan :verified:

@kwf okay, and since you don't want to be stuck on USB 2.0 speeds, you still need to splice 5V DC from USB.

So unless one were to solder - like you did, only a MiniPCIe to SATA-6G adaptor would've been an option.
ebay.de/itm/284350479783

The "thiccer" #hp #t620Plus would've had a #PCIe x4 slot and even more space as well as said mSATA slot populated.

If I had a 3D printer I would've likely made a custom lid with space to house more drives and an HBA:
ebay.de/itm/295105489676

@kwf okay, and since you don't want to be stuck on USB 2.0 speeds, you still need to splice 5V DC from USB.

So unless one were to solder - like you did, only a MiniPCIe to SATA-6G adaptor would've been an option.
ebay.de/itm/284350479783

The "thiccer" #hp #t620Plus would've had a #PCIe x4 slot and even more space as well as said mSATA slot populated.

28 Mar 2023 at 17:08 | Open on mstdn.social
Kenneth Finnegan

@kkarhan The T620 plus has effectively less space in it due to the fan tray for the PCIe slot.

I've got a few of those with 10G SFP+ NICs in the PCIe slot since the 1GbaseT NIC ended up being the gating item for performance.

28 Mar 2023 at 17:14 | Open on social.afront.org
Kenneth Finnegan
Go Up