Email or username:

Password:

Forgot your password?
All posts Tube🌱Time's posts Post Back to profile
Top-level
Tube🌱Time

this little guy turns the 8-bit value into hex! it's also configurable: you can flip the digits upside down for when you plug it into the left side of your breadboard. it can also trigger and latch data on the rising or falling edge of the optional trigger pulse, it can be level or edge sensitive, and you can set it to "single shot" capture a single value.
8 February at 1:30 | Open on mastodon.social
8 comments
Arthur Elsenaar

@tubetime Reminds me of the E&L TTL test rigs. Is there documentation on this thingy somewhere?

8 February at 10:15 | Open on mastodon.social
Johannes Hoff

@tubetime Nice! What are those magical connectors that accepts wires?

8 February at 13:34 | Open on mas.to
Tube🌱Time

@johanneshoff they're little machined pin sockets that are slightly larger than the ones used in the IC sockets. perfect for breadboard jumpers and resistor leads. mill-max makes them. the exact part number will go into the GitHub once I get that going

8 February at 15:37 | Open on mastodon.social
Johannes Hoff

@tubetime Awesome! I'll keep an eye out. It's like the missing link between breadboards and PCBs.

8 February at 15:59 | Open on mas.to
Brad Bell

@tubetime it’s a logic analyzer that people will actually enjoy using

10 February at 18:57 | Open on bitbang.social
Tube🌱Time

these boards, and more, are now available! download the designs here.

github.com/schlae/BreadboardGa

17 February at 20:19 | Open on mastodon.social
Arthur Elsenaar

@tubetime Great you've made these available! If some are ordering boards and want to share, please let me know.

17 February at 21:34 | Open on mastodon.social
Go Up