Email or username:

Password:

Forgot your password?
niconiconi's posts Post Back to profile
Top-level
niconiconi

I ordered the pre-production prototype version of TI's high-speed USB isolation chips as soon as I got the news. My order has just shipped today! :blobcataww: Time to design a development board. #electronics #usb

30 Nov 2021 at 12:21 | Open on cybre.space
18 comments
niconiconi

> isolation barrier capacitance, input to output: 1 pF
wow, that's some serious galvanic isolation. #electronics

2 Dec 2021 at 3:18 | Open on cybre.space
niconiconi

Mirror, mirror on the wall, who has the highest breakdown voltage of them all? #electronics #usb
2 Dec 2021 at 4:04 | Open on cybre.space
niconiconi

Pre-production preview chips from TI have just arrived. #electronics #usb

Chips in ESD bags with a Tekas Instruments receipt. The model is XISOUSB211DPR, the "X" stands for pre-production.
8 Dec 2021 at 8:23 | Open on cybre.space
niconiconi
niconiconi

Board almost finished after yet another month of procrastination and doing nothing. #electronics #usb

USB isolator board. The board is symmetrically laid out, left is the host side, right is the device side, with an isolation barrier in between.
22 Dec 2021 at 15:24 | Open on cybre.space
niconiconi

I can't wait to see some spectacular fireworks from a smoke test. #electronics

A circuit board schematic with a 1500 V (DC) isolation barrier.
27 Dec 2021 at 18:13 | Open on cybre.space
niconiconi

Hmmmm. So I need 20 millimeters of creepage distance for 1000 volts per IEC60950. That's kind of... Creepy. #electronics

28 Dec 2021 at 7:59 | Open on cybre.space
niconiconi

So this is what I need to do for the required creepage distance. I think the whole board is just gonna crack into two pieces. #electronics

A circuit board with a huge slot in the middle, almost cutting the entire board into two pieces.
28 Dec 2021 at 8:41 | Open on cybre.space
niconiconi

Anyways, I'm now pretty sure that those cheap $20 USB isolation dongles are definitely not designed for continuously working at 1000 V. It's just impossible when the required clearance and creepage are literally bigger than your entire dongle! Of course, unless it's only for functional isolation, for which there's no distance requirement at all. #electronics #usb

28 Dec 2021 at 9:05 | Open on cybre.space
niconiconi replied to niconiconi

On second thought, the isolated DCDC converter on my board only has functional isolation, and this already seriously limited the working voltage of the entire system. It's kind of pointless to design the rest of board for reinforced isolation per IEC 60950. I guess it's time to remove the slots. #electronics

28 Dec 2021 at 9:24 | Open on cybre.space
niconiconi replied to niconiconi

After closer inspection, it turned out that the astonishing 1500 volts (AC) & 2100 volts (DC) "Maximum Isolation Working Voltage" boasted by Texas Instruments is only an industry standard for digital isolation *components*, while authentic, it's not for complete *systems*.

When you actually use the system-level safety standards used by national regulators like IEC 60950 and IEC 60664, you'll find in a real application, the 8 mm creepage distance at the chip package limits the working voltage to no more than 800 volts AC (Material Group 1, Pollution Degree 2, Reinforced Insulation). So much for the marketing.

> The large print giveth and the small print taketh away. -Tom Waits

> The nice thing about standards is that you have so many to choose from; furthermore, if you do not like any of them, you can just wait for next year's model. - Andrew S. Tanenbaum

#electronics #usb

After closer inspection, it turned out that the astonishing 1500 volts (AC) & 2100 volts (DC) "Maximum Isolation Working Voltage" boasted by Texas Instruments is only an industry standard for digital isolation *components*, while authentic, it's not for complete *systems*.

When you actually use the system-level safety standards used by national regulators like IEC 60950 and IEC 60664, you'll find in a real application, the 8 mm creepage distance at the chip package limits the working voltage to no...

28 Dec 2021 at 16:26 | Open on cybre.space
niconiconi replied to niconiconi

There are more gotchas.

> Clearance: 8 mm
> Care must be taken during board design so that the mounting pads of the isolator on the printed-circuit board (PCB) do not reduce creepage and clearance.

Then the 8 mm clearance is immediately violated, officially, in the recommended footprint at the end of the datasheet. #electronics #usb

28 Dec 2021 at 16:37 | Open on cybre.space
niconiconi replied to niconiconi

Another pitfall is the IPC-2221 standard in most PCB calculators. Its clearance requirement can get ridiculous for some use cases because of the stepwise definition, yet insufficient for other uses cases (reinforced insulation).

"Friendship ended with IPC-2221, now IEC 60950 is my best friend!" #electronics

28 Dec 2021 at 17:12 | Open on cybre.space
niconiconi replied to niconiconi

UL sucks too. Their Recognized Component certificates are essentially useless. All they tell you is a certification exists, but without any information about the rated working conditions, which are critical to safety. A vendor can say its power supply works up to 1000 volts, and claims the power supply is also UL certified (without telling you it's certified only for 100 volts, the 1000 volts spec is only a functional rating and cannot be used for safety-critical applications).

The real information is in UL's Conditions of Acceptability, and it's often nowhere to be found. You can either try asking the vendor nicely and hope they don't ignore your request. Or pay (possibly thousands of dollars?) to purchase that information from UL. ledsmagazine.com/company-newsf #electronics

UL sucks too. Their Recognized Component certificates are essentially useless. All they tell you is a certification exists, but without any information about the rated working conditions, which are critical to safety. A vendor can say its power supply works up to 1000 volts, and claims the power supply is also UL certified (without telling you it's certified only for 100 volts, the 1000 volts spec is only a functional rating and cannot be used for safety-critical applications).

29 Dec 2021 at 17:18 | Open on cybre.space
niconiconi replied to niconiconi

PCB ordered. Added common-mode chokes at both sides of the isolated converter hopefully to suppress some noise across the barrier. Also removed the slot - the SIP DCDC module only has functional isolation, so increasing the creepage distance further is pointless... #electronics

USB isolator board. The board is symmetrically laid out, left is the host side, right is the device side, with an isolation barrier in between.
Back side of the PCB. A few SMD capacitors and resistors. And a "Let's All Love Lain" on the silkscreen.
31 Dec 2021 at 15:48 | Open on cybre.space
niconiconi replied to niconiconi

Hopefully I won't accidentally kill myself later in the dielectric withstand voltage test by the 3000 volts HiPot tester. LIke many on the Fediverse, ihatebeinga.live is a thing, but a HiPot tester is just a terrible way to die. #electronics

DANGER DO NOT TOUCH Not only will this kill you, it will hurt the whole time you are dying.
31 Dec 2021 at 15:56 | Open on cybre.space
niconiconi replied to niconiconi

My USB 2.0 isolation board is working. The Texas Instruments chip ISOUSB211 works as advertised, it really is the first USB 2.0 high-speed (480 Mbps) galvanic isolation chip on the open market. I'll release all the design files tomorrow. #electronics #usb

USB isolator board. The board is symmetrically laid out, left is the host side, right is the device side, with an isolation barrier in between. Across the barrier is a Texas Instruments ISOUSB211 isolated USB repeater chip, and also a DCDC power converter module.
Benchmark result using a USB flash drive. The read speed is 45 MiB/s, or 360 Mbps, this speed implies the isolator is working properly in high-speed USB mode.
6 Jan 2022 at 15:22 | Open on cybre.space
niconiconi replied to niconiconi

TI ISOUSB211 development board design is now public. This TI chip is the first ASIC capable of doing USB 2.0 High-Speed (480 Mbps, not 12 Mbps) galvanic isolation on the open market. As always, #Lain must be loved. notabug.org/niconiconi/isousb2 #electronics #usb

USB isolator board. The board is symmetrically laid out, left is the host side, right is the device side, with an isolation barrier in between. Across the barrier is a Texas Instruments ISOUSB211 isolated USB repeater chip, and also a DCDC power converter module.
Back side of the PCB, there are only a few resistors and capacitors on this side. On the silkscreen there's a sketch image of Lain, with the words "Let's all love Lain"
7 Jan 2022 at 7:40 | Open on cybre.space
Go Up