Email or username:

Password:

Forgot your password?
Top-level
Ken Shirriff

Creating chips on a silicon wafer is complicated and lots can go wrong. A few test circuits were placed on the die so Intel could check the important characteristics and make sure everything was okay. The white squares are test pads. Tiny probes contact the pads for measurements.

3 comments
Ken Shirriff

@Archie8 The probes need to be pretty small to probe the die. A typical probe tip diameter is 1.5 mils (.04 mm).
This TubeTime thread has a bunch of photos: twitter.com/TubeTimeUS/status/

Go Up