Make yourself a little foxxo companion | Volpeon :wvrnFlight:

Volpeon :wvrnFlight: 's posts Post Back to profile

Volpeon :wvrnFlight:

Make yourself a little foxxo companion

A manual showing how to fold a fox from a single paper square. Text extracted via OCR:

1. FIRST FOLDS:
Take one corner of your paper square and fold it in half to the opposite corner, making a crease. Unfold it back into a square, then fold it in half again using the other two corners.

2. FOLDING IN:
With the crease horizontal, fold the top and bottom corners of the triangle into the centre. Use the crease to align the two folds in the middle.

3. SMALL SQUARE:
Now you have a small square, split into two triangles. Fold the corner of one triangle backwards to line up with the corner of the other.

4. MAKING A FACE:
Fold the corner, lifting only the top layer, at the angle shown by the dotted line. Lift the next layer from the same corner, open it up and flatten the top to make a diamond.

5. BEND THE TAIL:
Take the opposite corner and fold it forwards across the front of your design. This should make this corner look like the fox's tail.

6. DRAW SOME FEATURES:
Finish it off by drawing a fox's face onto the area you flattened out. Now you can stand your fox up straight to admire, using its tail to balance it.

Like 2 30 Dec 2024 at 20:18 | Open on icy.wyvern.rip

No comments